sdrv_fuse.h

Go to the documentation of this file.

 
#ifndef SDRV_FUSE_H_
#define SDRV_FUSE_H_
 
#include <compiler.h>
#include <types.h>
#include "sdrv_common.h"
 
typedef enum {
    PLOCK = 1,
    RLOCK = 2,
    OLOCK = 4,
    HLOCK = 8,
} fuse_lock_bits_e;
 
typedef enum {
    /* fuse lock bank from bank1 to bank32 */
    FUSE_LOCK_BANK1    = 0,
    FUSE_LOCK_BANK2    = 1,
    FUSE_LOCK_BANK3    = 2,
    FUSE_LOCK_BANK4    = 3,
    FUSE_LOCK_BANK5    = 4,
    FUSE_LOCK_BANK6    = 5,
    FUSE_LOCK_BANK7    = 6,
    FUSE_LOCK_BANK8    = 7,
    FUSE_LOCK_BANK9    = 8,
    FUSE_LOCK_BANK10   = 9,
    FUSE_LOCK_BANK11   = 10,
    FUSE_LOCK_BANK12   = 11,
    FUSE_LOCK_BANK13   = 12,
    FUSE_LOCK_BANK14   = 13,
    FUSE_LOCK_BANK15   = 14,
    FUSE_LOCK_BANK16   = 15,
    FUSE_LOCK_BANK17   = 16,
    FUSE_LOCK_BANK18   = 17,
    FUSE_LOCK_BANK19   = 18,
    FUSE_LOCK_BANK20   = 19,
    FUSE_LOCK_BANK21   = 20,
    FUSE_LOCK_BANK22   = 21,
    FUSE_LOCK_BANK23   = 22,
    FUSE_LOCK_BANK24   = 23,
    FUSE_LOCK_BANK25   = 24,
    FUSE_LOCK_BANK26   = 25,
    FUSE_LOCK_BANK27   = 26,
    FUSE_LOCK_BANK28   = 27,
    FUSE_LOCK_BANK29   = 28,
    FUSE_LOCK_BANK30   = 29,
    FUSE_LOCK_BANK31   = 30,
    FUSE_LOCK_BANK32   = 31,
} fuse_lock_bank_e;
 
enum
{
    SDRV_FUSE_CTRL_ERROR_OR_BUSY = SDRV_ERROR_STATUS(SDRV_STATUS_GROUP_FUSE, 0),           /* Fuse status for fuse_ctrl register is error or busy. */
    SDRV_FUSE_CTRL_ERROR = SDRV_ERROR_STATUS(SDRV_STATUS_GROUP_FUSE, 1),                   /* Fuse status for fuse_ctrl register is error. */
};
 
uint32_t sdrv_fuse_read(uint32_t index);
 
status_t sdrv_fuse_sense(uint32_t index, uint32_t *data);
 
status_t sdrv_fuse_program(uint32_t index, uint32_t v);
 
status_t sdrv_fuse_program_raw(uint32_t index, uint32_t val, bool ecc);
 
status_t sdrv_fuse_reload(void);
 
status_t sdrv_fuse_set_sticky_bit(uint32_t id);
 
status_t sdrv_fuse_lock_bank(fuse_lock_bank_e bank, fuse_lock_bits_e lock_bits);
 
uint32_t sdrv_fuse_get_bank_lock(fuse_lock_bank_e bank);
 
status_t sdrv_fuse_ctl_cfg_timing(uint32_t freq_mhz);
 
status_t sdrv_fuse_ctl_trigger_sw_vio(fuse_lock_bits_e msk);
 
#endif /* SDRV_FUSE_H_ */