diff --git a/UART1.C b/UART1.C deleted file mode 100644 index 416fc49..0000000 --- a/UART1.C +++ /dev/null @@ -1,261 +0,0 @@ -//**************************************************************************** -// @Module UART1 (Serial Interface) -// @Filename UART1.C -// @Project CL2.0.dav -//---------------------------------------------------------------------------- -// @Controller Infineon XC886CLM-8FF -// -// @Compiler Keil -// -// @Codegenerator 1.3 -// -// @Description: This file contains functions that use the UART1 module. -// -//---------------------------------------------------------------------------- -// @Date 2024/10/31 19:17:02 -// -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,1) - -// USER CODE END - - - -//**************************************************************************** -// @Project Includes -//**************************************************************************** - -#include "MAIN.H" - -// USER CODE BEGIN (UART1_General,2) - -// USER CODE END - - -//**************************************************************************** -// @Macros -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,3) - -// USER CODE END - - -//**************************************************************************** -// @Defines -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,4) - -// USER CODE END - - -//**************************************************************************** -// @Typedefs -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,5) - -// USER CODE END - - -//**************************************************************************** -// @Imported Global Variables -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,6) - -// USER CODE END - - -//**************************************************************************** -// @Global Variables -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,7) - -// USER CODE END - - -//**************************************************************************** -// @External Prototypes -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,8) - -// USER CODE END - - -//**************************************************************************** -// @Prototypes Of Local Functions -//**************************************************************************** - -// USER CODE BEGIN (UART1_General,9) - -// USER CODE END - - -//**************************************************************************** -// @Function void UART1_vInit(void) -// -//---------------------------------------------------------------------------- -// @Description This is the initialization function of the UART1 function -// library. It is assumed that the SFRs used by this library -// are in their reset state. -// -// The following SFR fields will be initialized: -// - register SCON -// - bits SMOD and EX2 -// -//---------------------------------------------------------------------------- -// @Returnvalue None -// -//---------------------------------------------------------------------------- -// @Parameters None -// -//---------------------------------------------------------------------------- -// @Date 2024/10/31 -// -//**************************************************************************** - -// USER CODE BEGIN (UART1_Init,1) - -// USER CODE END - -void UART1_vInit(void) -{ - // USER CODE BEGIN (UART1_Init,2) - - // USER CODE END - - /// ----------------------------------------------------------------------- - /// UART1 settings - /// ----------------------------------------------------------------------- - /// Pin TXD1_1 (P3.1) is selected for transmission - /// Pin RXD1_1 (P3.2) is selected for reception - /// Receiver enabled - /// UART1 interrupt is enabled - /// Ignore Normal divider overflow interrupt - /// Mode 1: 8-bit data, 1 start bit, 1 stop bit, variable baud rate - /// Receiver interrupt flag RI_1 will only be activated if a valid stop - /// bit was received - /// BRG is selected for baudrate generation - - SFR_PAGE(_pp2, noSST); // switch to page 2 without saving - P3_ALTSEL0 |= (ubyte)0x02; // configure alternate function register 0 - P3_ALTSEL1 |= (ubyte)0x02; // configure alternate function register 1 - SFR_PAGE(_pp0, noSST); // switch to page 0 without saving - P3_DIR |= (ubyte)0x02; // set output direction - - - SFR_PAGE(_su3, noSST); // switch to page 3 without saving - MODPISEL1 |= (ubyte)0x08; // configure peripheral input select register - SFR_PAGE(_su0, noSST); // switch to page 0 without saving - - SET_RMAP(); - - UART1_BCON = 0x00; // reset baudrate timer/reload register - UART1_SCON = 0x50; // load serial channel control register - - /// ----------------------------------------------------------------------- - /// Baudrate generator settings - /// ----------------------------------------------------------------------- - /// input clock = fPCLK - /// Fractional divider is disabled - /// baudrate = 9.6154 kbaud - - UART1_BG = 0x9B; // load baudrate timer/reload register - UART1_BCON |= 0x01; // load baud rate control register - - - RESET_RMAP(); - - - // USER CODE BEGIN (UART1_Init,3) - - // USER CODE END - -} // End of function UART1_vInit - - -//**************************************************************************** -// @Function ubyte UART1_ubGetData8(void) -// -//---------------------------------------------------------------------------- -// @Description This function returns the last received 8-bit data unit. -// Interrupt flag RI_1 will be cleared. -// -//---------------------------------------------------------------------------- -// @Returnvalue received data unit -// -//---------------------------------------------------------------------------- -// @Parameters None -// -//---------------------------------------------------------------------------- -// @Date 2024/10/31 -// -//**************************************************************************** - -ubyte UART1_ubGetData8(void) -{ - - ubyte ubData; - - _push_(SYSCON0); // push the current RMAP - SET_RMAP(); - - // Clear the receiver interrupt flag - UART1_SCON &= ~(ubyte)0x01; - - - // Read the received data bits 0..7 - ubData = (ubyte)UART1_SBUF; - - - _pop_(SYSCON0); // restore the old RMAP - - // Return the received data byte - return(ubData); - -} // End of function UART1_ubGetData8 -//**************************************************************************** -// @Function void UART1_vSendData8(ubyte ubData) -// -//---------------------------------------------------------------------------- -// @Description This function transmits an 8-bit data unit. At first -// interrupt flag TI_1 is cleared, then buffer SBUF is written. -// -//---------------------------------------------------------------------------- -// @Returnvalue None -// -//---------------------------------------------------------------------------- -// @Parameters ubData: -// data to be transmitted -// -//---------------------------------------------------------------------------- -// @Date 2024/10/31 -// -//**************************************************************************** - -void UART1_vSendData8(ubyte ubData) -{ - - _push_(SYSCON0); // push the current RMAP - SET_RMAP(); - - // Clear the transmitter interrupt flag - UART1_SCON &= ~(ubyte)0x02; - - // Write the transmit data byte, this initiates the transmission. - UART1_SBUF = ubData; - - _pop_(SYSCON0); // restore the old RMAP - -} // End of function UART1_vSendData8 - - -// USER CODE BEGIN (UART1_General,10) - -// USER CODE END -