#include <sdrv_btm.h>
#include <regs_base.h>
#include <irq_num.h>
#include <debug.h>
#include <wdt_refresh.h>
#include <sdrv_rstgen.h>
#include <sdrv_gpio.h>
#include <udelay/udelay.h>
#include <reset_ip.h>
#include <sdrv_xspi.h>
#include "IAP_Task.h"
#include <armv7-r/cache.h>

void reboot_global(sdrv_rom_ctrl_boot_mode_e boot_mode)
{
    uint32_t glb_status = sdrv_rstgen_global_status(&rstctl_glb);

    ssdk_printf(SSDK_INFO,"global status: 0x%x \r\n", glb_status);
#if CONFIG_E3L
    if (glb_status & (1 << 6u)) {
#else
    if (glb_status & (1 << 11u | 1 << 31u)) {
#endif
        ssdk_printf(SSDK_INFO, "SSDK E3 Global Reset Demo Success!\r\n");
    }

    /* clear global reset status */
    sdrv_rstgen_global_status_clear(&rstctl_glb);

    /* set boot pin mode */
    ssdk_printf(SSDK_INFO,"set boot pin mode: %d \r\n", boot_mode);
    sdrv_rom_ctrl_set_boot_pin_flag(boot_mode);

    /* soft reset flash */
    flash.sw_rst = true;
    sdrv_spi_nor_deinit(&flash);
    /* soft reset xspi host */
    sdrv_spi_nor_drv_deinit(&flash);
    
    /* wait 3 seconds */
    udelay(100000);

    /* clear sf boot status */
    sdrv_rstgen_write_general(&reset_general_reg_sf_boot, 0);

    /* Only for norflash, update rom ctrl data */
#ifndef CONFIG_HYPERBUS_MODE
    /* 重要!!! 此处仅适用于norflash没有被初始化 (sdrv_xspi_init) 的流程,
       此时sfs文件中对flash模式的描述是准确的, 可以依据sfs文件将flash模式
       通知rom来完成重启。
       但是如果工程中初始化了flash, 则必须调用sdrv_spi_nor_drv_deinit,
       将xspi host deinit之后再global reset, 此处不再适用! */
    sdrv_rom_ctrl_data_update();
#endif
    
   ssdk_printf(SSDK_INFO,"reset!: %d \r\n", boot_mode);
   
//    arch_invalidate_cache_range(0x01978000,0x8000);//清除 dcache

    /* global reset */
    sdrv_rstgen_global_reset(&rstctl_glb);
}







void External_wdt_refresh(void)
{
//    sdrv_wdt_refresh(wdt_type);//喂狗
    
    sdrv_gpio_toggle_pin_output_level(WDTGPIO);
}


sdrv_wdt_t *wdt_type = (sdrv_wdt_t *)APB_WDT1_BASE;

static bool internal_reset_switch = true;
static bool external_reset_switch = false;
//看门狗初始化
void wdt_init(uint32_t timeoutms)
{
    static sdrv_wdt_config_t wdt_cfg;
    int ret = 0;
//--------------------------------------------------
     sdrv_wdt_get_default_config(&wdt_cfg);

    if (internal_reset_switch) {
        wdt_cfg.int_rst.reset_en = true;
        sdrv_rstgen_wdt_reset_enable(RESET_WDT1, true);
    }

    if (external_reset_switch) {
        /* config GPIO_H12 as WDT1_RST_N function */
        wdt_cfg.ext_rst.reset_en = true;
        wdt_cfg.ext_rst.reset_mode = 0;  /* low level active */
    }

    ret = sdrv_wdt_init(wdt_type, &wdt_cfg);
    ASSERT(ret == 0);

//    irq_attach(wdt_irq, wdt_irq_handler, NULL);
//    irq_enable(wdt_irq);

    sdrv_wdt_set_timeout(wdt_type, timeoutms);

    ret = sdrv_wdt_enable(wdt_type);    
}