482 lines
19 KiB
Plaintext
482 lines
19 KiB
Plaintext
SEGGER J-Link Commander V7.56d (Compiled Oct 29 2021 14:02:52)
|
|
DLL version V7.56d, compiled Oct 29 2021 14:01:36
|
|
|
|
|
|
J-Link Command File read successfully.
|
|
Processing script file...
|
|
|
|
J-Link connection not established yet but required for command.
|
|
Connecting to J-Link via USB...O.K.
|
|
Firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
Hardware version: V11.00
|
|
S/N: 941000024
|
|
License(s): GDB, JFlash, FlashDL, RDI, FlashBP
|
|
VTref=3.341V
|
|
Target connection not established yet but required for command.
|
|
Device "E3640_HYPERFLASH" selected.
|
|
|
|
|
|
Connecting to target via SWD
|
|
ConfigTargetSettings() start
|
|
----------JLinkScript ConfigTargetSettings----------
|
|
ConfigTargetSettings() end
|
|
Found SW-DP with ID 0x2BA01477
|
|
DPIDR: 0x2BA01477
|
|
Scanning AP map to find all available APs
|
|
AP[1]: Stopped AP scan as end of AP map has been reached
|
|
AP[0]: APB-AP (IDR: 0x24770002)
|
|
Iterating through AP map to find APB-AP to use
|
|
AP[0]: APB-AP found
|
|
Found Cortex-R5 r1p3
|
|
4 code breakpoints, 3 data breakpoints
|
|
Debug architecture ARMv7.0
|
|
Data endian: little
|
|
Main ID register: 0x411FC153
|
|
I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
TCM Type register: 0x00010001
|
|
MPU Type register: 0x00001000
|
|
System control register:
|
|
Instruction endian: little
|
|
Level-1 instruction cache disabled
|
|
Level-1 data cache disabled
|
|
MPU disabled
|
|
Branch prediction enabled
|
|
Memory zones:
|
|
Zone: Default Description: Default access mode
|
|
Zone: APB-AP (AP0) Description: DMA like acc. in AP0 addr. space
|
|
Cortex-R5 identified.
|
|
Reset delay: 0 ms
|
|
Reset type NORMAL: Reset CPU + peripherals via reset pin. CPU halted immediately after reset.
|
|
Cortex-A/R (reset): Re-initializing debug logic.
|
|
CPU not halted after Reset, halting using Halt request
|
|
|
|
PC: (R15) = 0190603C, CPSR = 800001D3 (SVC mode, ARM FIQ dis. IRQ dis.)
|
|
Current:
|
|
R0 =F07E0000, R1 =F07E0000, R2 =F07E0008, R3 =00000433
|
|
R4 =5AA5F00F, R5 =A55A0FF0, R6 =5AA5F00F, R7 =0190FF70
|
|
R8 =5AA5F00F, R9 =A55A0FF0, R10=00000000, R11=0190FF6C, R12=00000000
|
|
R13=0190FF58, R14=01906020, SPSR=00007FF7
|
|
USR: R8 =5AA5F00F, R9 =A55A0FF0, R10=00000000, R11=0190FF6C, R12=00000000
|
|
R13=01910000, R14=00000000
|
|
FIQ: R8 =00000000, R9 =00000000, R10=00000000, R11=00000000, R12=00000000
|
|
R13=01910000, R14=00000000, SPSR=000001D3
|
|
IRQ: R13=01910000, R14=00000000, SPSR=000001D3
|
|
SVC: R13=0190FF58, R14=01906020, SPSR=000001D3
|
|
ABT: R13=01910000, R14=00000000, SPSR=000001D3
|
|
UND: R13=01910000, R14=00000000, SPSR=000001D3
|
|
|
|
CP15[0, 1, 0, 0] = 0x08E7087A
|
|
|
|
CP15[0, 1, 0, 1] = 0x00000020
|
|
|
|
CP15[0, 9, 1, 1] = 0x003E0001
|
|
|
|
CP15[0, 9, 1, 0] = 0x003F0001
|
|
|
|
|
|
Script processing completed.
|
|
|
|
Application log started
|
|
- J-Flash V7.56d (J-Flash compiled Oct 29 2021 14:02:00)
|
|
- JLinkARM.dll V7.56d (DLL compiled Oct 29 2021 14:01:36)
|
|
Optional command line parameters found
|
|
- [1]: -openprjE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash
|
|
- [2]: -openE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\sfs.bin,0x10000000
|
|
- [3]: -jflashlogjflashlog_tmp.txt
|
|
- [4]: -jlinklogjlinklog_tmp.txt
|
|
- [5]: -mergeE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\rfd.bin,0x100000F0
|
|
- [6]: -auto
|
|
- [7]: -exit
|
|
Reading flash device list [D:\Program Files\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
|
|
- List of flash devices read successfully (451 Devices)
|
|
Reading MCU device list ...
|
|
- List of MCU devices read successfully (8738 Devices)
|
|
Opening project file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash] ...
|
|
- Project opened successfully
|
|
Opening data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\sfs.bin] ...
|
|
- Data file opened successfully (128 bytes, 1 range, CRC of data = 0xB2A24A8D, CRC of file = 0xB2A24A8D)
|
|
Merging data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\rfd.bin] ...
|
|
- Data files merged successfully (400 bytes, 2 ranges, CRC = 0x8A93FFAF)
|
|
Auto programming target (400 bytes, 2 ranges) ...
|
|
- Connecting ...
|
|
- Connecting via USB to probe/ programmer device 0
|
|
- Probe/ Programmer firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
- Device "E3640_HYPERFLASH" selected.
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- VTarget = 3.341V
|
|
- Found SW-DP with ID 0x2BA01477
|
|
- DPIDR: 0x2BA01477
|
|
- Scanning AP map to find all available APs
|
|
- AP[1]: Stopped AP scan as end of AP map has been reached
|
|
- AP[0]: APB-AP (IDR: 0x24770002)
|
|
- Iterating through AP map to find APB-AP to use
|
|
- AP[0]: APB-AP found
|
|
- ROMTbl[0][0]: CompAddr: F2081000 CID: B105900D, PID: 004BBC15 Cortex-R5
|
|
- Found Cortex-R5 r1p3
|
|
- 4 code breakpoints, 3 data breakpoints
|
|
- Debug architecture ARMv7.0
|
|
- Data endian: little
|
|
- Main ID register: 0x411FC153
|
|
- I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- TCM Type register: 0x00010001
|
|
- MPU Type register: 0x00001000
|
|
- System control register:
|
|
- Instruction endian: little
|
|
- Level-1 instruction cache disabled
|
|
- Level-1 data cache disabled
|
|
- MPU disabled
|
|
- Branch prediction enabled
|
|
- Executing init sequence ...
|
|
- Initialized successfully
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- Found 1 JTAG device. Core ID: 0x2BA01477 (None)
|
|
- Connected successfully
|
|
- Checking if selected data fits into selected flash sectors.
|
|
- Start of determining flash info (Bank 0 @ 0x10000000)
|
|
- End of determining flash info
|
|
- Flash bank info:
|
|
- 256 * 256 KB @ 0x10000000
|
|
- Start of preparing flash programming
|
|
- End of preparing flash programming
|
|
- Start of determining dirty areas in flash cache
|
|
- End of determining dirty areas
|
|
- CPU speed could not be measured.
|
|
- Start of erasing sectors
|
|
- Erasing range 0x10000000 - 0x1003FFFF ( 1 Sector, 256 KB)
|
|
- End of erasing sectors
|
|
- Start of flash programming
|
|
- Programming range 0x10000000 - 0x1003FFFF ( 1 Sector, 256 KB)
|
|
- End of flash programming
|
|
- Flash programming performed for 1 range (262144 bytes)
|
|
- 0x10000000 - 0x1003FFFF ( 1 Sector, 256 KB)
|
|
- Start of verifying flash
|
|
- ERROR: Failed to read memory (0x10000 bytes @ address 0x10000000)
|
|
- ERROR: Verification failed @ address 0x00000000 (CRC: 0x00000000, Expected: 0xFFFFFFFF)
|
|
- End of verifying flash
|
|
- ERROR: Verify failed
|
|
- Start of restoring
|
|
- End of restoring
|
|
- ERROR: Failed to auto program target
|
|
J-Flash V7.56d Error: Failed to read memory (0x10000 bytes @ address 0x10000000)
|
|
Verification failed @ address 0x00000000 (CRC: 0x00000000, Expected: 0xFFFFFFFF)
|
|
Verify failed
|
|
Failed to auto program target
|
|
Disconnecting ...
|
|
- Disconnected
|
|
Close project
|
|
- Project closed
|
|
Application log started
|
|
- J-Flash V7.56d (J-Flash compiled Oct 29 2021 14:02:00)
|
|
- JLinkARM.dll V7.56d (DLL compiled Oct 29 2021 14:01:36)
|
|
Optional command line parameters found
|
|
- [1]: -openprjE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash
|
|
- [2]: -openE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot0.bin,0x100C0000
|
|
- [3]: -jflashlogjflashlog_tmp.txt
|
|
- [4]: -jlinklogjlinklog_tmp.txt
|
|
- [5]: -auto
|
|
- [6]: -exit
|
|
Reading flash device list [D:\Program Files\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
|
|
- List of flash devices read successfully (451 Devices)
|
|
Reading MCU device list ...
|
|
- List of MCU devices read successfully (8738 Devices)
|
|
Opening project file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash] ...
|
|
- Project opened successfully
|
|
Opening data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot0.bin] ...
|
|
- Data file opened successfully (61440 bytes, 1 range, CRC of data = 0xDD3D7BDD, CRC of file = 0xDD3D7BDD)
|
|
Auto programming target (61440 bytes, 1 range) ...
|
|
- Connecting ...
|
|
- Connecting via USB to probe/ programmer device 0
|
|
- Probe/ Programmer firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
- Device "E3640_HYPERFLASH" selected.
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- VTarget = 3.341V
|
|
- Found SW-DP with ID 0x2BA01477
|
|
- DPIDR: 0x2BA01477
|
|
- Scanning AP map to find all available APs
|
|
- AP[1]: Stopped AP scan as end of AP map has been reached
|
|
- AP[0]: APB-AP (IDR: 0x24770002)
|
|
- Iterating through AP map to find APB-AP to use
|
|
- AP[0]: APB-AP found
|
|
- ROMTbl[0][0]: CompAddr: F2081000 CID: B105900D, PID: 004BBC15 Cortex-R5
|
|
- Found Cortex-R5 r1p3
|
|
- 4 code breakpoints, 3 data breakpoints
|
|
- Debug architecture ARMv7.0
|
|
- Data endian: little
|
|
- Main ID register: 0x411FC153
|
|
- I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- TCM Type register: 0x00010001
|
|
- MPU Type register: 0x00001000
|
|
- System control register:
|
|
- Instruction endian: little
|
|
- Level-1 instruction cache disabled
|
|
- Level-1 data cache disabled
|
|
- MPU disabled
|
|
- Branch prediction enabled
|
|
- Executing init sequence ...
|
|
- Initialized successfully
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- Found 1 JTAG device. Core ID: 0x2BA01477 (None)
|
|
- Connected successfully
|
|
- Checking if selected data fits into selected flash sectors.
|
|
- Start of determining flash info (Bank 0 @ 0x10000000)
|
|
- End of determining flash info
|
|
- Flash bank info:
|
|
- 256 * 256 KB @ 0x10000000
|
|
- Start of preparing flash programming
|
|
- End of preparing flash programming
|
|
- Start of determining dirty areas in flash cache
|
|
- End of determining dirty areas
|
|
- CPU speed could not be measured.
|
|
- Start of erasing sectors
|
|
- Erasing range 0x100C0000 - 0x100FFFFF ( 1 Sector, 256 KB)
|
|
- ERROR: Failed to erase sectors.
|
|
- End of erasing sectors
|
|
- ERROR: Erase failed
|
|
- Start of restoring
|
|
- End of restoring
|
|
- ERROR: Failed to auto program target
|
|
J-Flash V7.56d Error: Failed to erase sectors.
|
|
Erase failed
|
|
Failed to auto program target
|
|
Disconnecting ...
|
|
- Disconnected
|
|
Close project
|
|
- Project closed
|
|
Application log started
|
|
- J-Flash V7.56d (J-Flash compiled Oct 29 2021 14:02:00)
|
|
- JLinkARM.dll V7.56d (DLL compiled Oct 29 2021 14:01:36)
|
|
Optional command line parameters found
|
|
- [1]: -openprjE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash
|
|
- [2]: -openE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot1.bin,0x104C0000
|
|
- [3]: -jflashlogjflashlog_tmp.txt
|
|
- [4]: -jlinklogjlinklog_tmp.txt
|
|
- [5]: -auto
|
|
- [6]: -exit
|
|
Reading flash device list [D:\Program Files\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
|
|
- List of flash devices read successfully (451 Devices)
|
|
Reading MCU device list ...
|
|
- List of MCU devices read successfully (8738 Devices)
|
|
Opening project file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash] ...
|
|
- Project opened successfully
|
|
Opening data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot1.bin] ...
|
|
- Data file opened successfully (61440 bytes, 1 range, CRC of data = 0xDD3D7BDD, CRC of file = 0xDD3D7BDD)
|
|
Auto programming target (61440 bytes, 1 range) ...
|
|
- Connecting ...
|
|
- Connecting via USB to probe/ programmer device 0
|
|
- Probe/ Programmer firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
- Device "E3640_HYPERFLASH" selected.
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- VTarget = 3.341V
|
|
- Found SW-DP with ID 0x2BA01477
|
|
- DPIDR: 0x2BA01477
|
|
- Scanning AP map to find all available APs
|
|
- AP[1]: Stopped AP scan as end of AP map has been reached
|
|
- AP[0]: APB-AP (IDR: 0x24770002)
|
|
- Iterating through AP map to find APB-AP to use
|
|
- AP[0]: APB-AP found
|
|
- ROMTbl[0][0]: CompAddr: F2081000 CID: B105900D, PID: 004BBC15 Cortex-R5
|
|
- Found Cortex-R5 r1p3
|
|
- 4 code breakpoints, 3 data breakpoints
|
|
- Debug architecture ARMv7.0
|
|
- Data endian: little
|
|
- Main ID register: 0x411FC153
|
|
- I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- TCM Type register: 0x00010001
|
|
- MPU Type register: 0x00001000
|
|
- System control register:
|
|
- Instruction endian: little
|
|
- Level-1 instruction cache disabled
|
|
- Level-1 data cache disabled
|
|
- MPU disabled
|
|
- Branch prediction enabled
|
|
- Executing init sequence ...
|
|
- Initialized successfully
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- Found 1 JTAG device. Core ID: 0x2BA01477 (None)
|
|
- Connected successfully
|
|
- Checking if selected data fits into selected flash sectors.
|
|
- Start of determining flash info (Bank 0 @ 0x10000000)
|
|
- End of determining flash info
|
|
- Flash bank info:
|
|
- 256 * 256 KB @ 0x10000000
|
|
- Start of preparing flash programming
|
|
- End of preparing flash programming
|
|
- Start of determining dirty areas in flash cache
|
|
- End of determining dirty areas
|
|
- CPU speed could not be measured.
|
|
- Start of erasing sectors
|
|
- Erasing range 0x104C0000 - 0x104FFFFF ( 1 Sector, 256 KB)
|
|
- ERROR: Failed to erase sectors.
|
|
- End of erasing sectors
|
|
- ERROR: Erase failed
|
|
- Start of restoring
|
|
- End of restoring
|
|
- ERROR: Failed to auto program target
|
|
J-Flash V7.56d Error: Failed to erase sectors.
|
|
Erase failed
|
|
Failed to auto program target
|
|
Disconnecting ...
|
|
- Disconnected
|
|
Close project
|
|
- Project closed
|
|
Application log started
|
|
- J-Flash V7.56d (J-Flash compiled Oct 29 2021 14:02:00)
|
|
- JLinkARM.dll V7.56d (DLL compiled Oct 29 2021 14:01:36)
|
|
Optional command line parameters found
|
|
- [1]: -openprjE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash
|
|
- [2]: -openE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot2.bin,0x108C0000
|
|
- [3]: -jflashlogjflashlog_tmp.txt
|
|
- [4]: -jlinklogjlinklog_tmp.txt
|
|
- [5]: -auto
|
|
- [6]: -exit
|
|
Reading flash device list [D:\Program Files\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
|
|
- List of flash devices read successfully (451 Devices)
|
|
Reading MCU device list ...
|
|
- List of MCU devices read successfully (8738 Devices)
|
|
Opening project file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash] ...
|
|
- Project opened successfully
|
|
Opening data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\boot2.bin] ...
|
|
- Data file opened successfully (61440 bytes, 1 range, CRC of data = 0xDD3D7BDD, CRC of file = 0xDD3D7BDD)
|
|
Auto programming target (61440 bytes, 1 range) ...
|
|
- Connecting ...
|
|
- Connecting via USB to probe/ programmer device 0
|
|
- Probe/ Programmer firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
- Device "E3640_HYPERFLASH" selected.
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- VTarget = 3.341V
|
|
- Found SW-DP with ID 0x2BA01477
|
|
- DPIDR: 0x2BA01477
|
|
- Scanning AP map to find all available APs
|
|
- AP[1]: Stopped AP scan as end of AP map has been reached
|
|
- AP[0]: APB-AP (IDR: 0x24770002)
|
|
- Iterating through AP map to find APB-AP to use
|
|
- AP[0]: APB-AP found
|
|
- ROMTbl[0][0]: CompAddr: F2081000 CID: B105900D, PID: 004BBC15 Cortex-R5
|
|
- Found Cortex-R5 r1p3
|
|
- 4 code breakpoints, 3 data breakpoints
|
|
- Debug architecture ARMv7.0
|
|
- Data endian: little
|
|
- Main ID register: 0x411FC153
|
|
- I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- TCM Type register: 0x00010001
|
|
- MPU Type register: 0x00001000
|
|
- System control register:
|
|
- Instruction endian: little
|
|
- Level-1 instruction cache disabled
|
|
- Level-1 data cache disabled
|
|
- MPU disabled
|
|
- Branch prediction enabled
|
|
- Executing init sequence ...
|
|
- Initialized successfully
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- Found 1 JTAG device. Core ID: 0x2BA01477 (None)
|
|
- Connected successfully
|
|
- Checking if selected data fits into selected flash sectors.
|
|
- Start of determining flash info (Bank 0 @ 0x10000000)
|
|
- End of determining flash info
|
|
- Flash bank info:
|
|
- 256 * 256 KB @ 0x10000000
|
|
- Start of preparing flash programming
|
|
- End of preparing flash programming
|
|
- Start of determining dirty areas in flash cache
|
|
- End of determining dirty areas
|
|
- CPU speed could not be measured.
|
|
- Start of erasing sectors
|
|
- Erasing range 0x108C0000 - 0x108FFFFF ( 1 Sector, 256 KB)
|
|
- ERROR: Failed to erase sectors.
|
|
- End of erasing sectors
|
|
- ERROR: Erase failed
|
|
- Start of restoring
|
|
- End of restoring
|
|
- ERROR: Failed to auto program target
|
|
J-Flash V7.56d Error: Failed to erase sectors.
|
|
Erase failed
|
|
Failed to auto program target
|
|
Disconnecting ...
|
|
- Disconnected
|
|
Close project
|
|
- Project closed
|
|
Application log started
|
|
- J-Flash V7.56d (J-Flash compiled Oct 29 2021 14:02:00)
|
|
- JLinkARM.dll V7.56d (DLL compiled Oct 29 2021 14:01:36)
|
|
Optional command line parameters found
|
|
- [1]: -openprjE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash
|
|
- [2]: -openE:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\0x140000.bin,0x10140000
|
|
- [3]: -jflashlogjflashlog_tmp.txt
|
|
- [4]: -jlinklogjlinklog_tmp.txt
|
|
- [5]: -auto
|
|
- [6]: -exit
|
|
Reading flash device list [D:\Program Files\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
|
|
- List of flash devices read successfully (451 Devices)
|
|
Reading MCU device list ...
|
|
- List of MCU devices read successfully (8738 Devices)
|
|
Opening project file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\SemiDrive.jflash] ...
|
|
- Project opened successfully
|
|
Opening data file [E:\WSL\git_repo\E3_bkp\devices\script\JFLASH\E3640_hyperflash\0x140000.bin] ...
|
|
- Data file opened successfully (51639 bytes, 1 range, CRC of data = 0x23350F44, CRC of file = 0x23350F44)
|
|
Auto programming target (51639 bytes, 1 range) ...
|
|
- Connecting ...
|
|
- Connecting via USB to probe/ programmer device 0
|
|
- Probe/ Programmer firmware: J-Link V11 compiled Apr 27 2041 16:36:21
|
|
- Device "E3640_HYPERFLASH" selected.
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- VTarget = 3.341V
|
|
- Found SW-DP with ID 0x2BA01477
|
|
- DPIDR: 0x2BA01477
|
|
- Scanning AP map to find all available APs
|
|
- AP[1]: Stopped AP scan as end of AP map has been reached
|
|
- AP[0]: APB-AP (IDR: 0x24770002)
|
|
- Iterating through AP map to find APB-AP to use
|
|
- AP[0]: APB-AP found
|
|
- ROMTbl[0][0]: CompAddr: F2081000 CID: B105900D, PID: 004BBC15 Cortex-R5
|
|
- Found Cortex-R5 r1p3
|
|
- 4 code breakpoints, 3 data breakpoints
|
|
- Debug architecture ARMv7.0
|
|
- Data endian: little
|
|
- Main ID register: 0x411FC153
|
|
- I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
|
|
- TCM Type register: 0x00010001
|
|
- MPU Type register: 0x00001000
|
|
- System control register:
|
|
- Instruction endian: little
|
|
- Level-1 instruction cache disabled
|
|
- Level-1 data cache disabled
|
|
- MPU disabled
|
|
- Branch prediction enabled
|
|
- Executing init sequence ...
|
|
- Initialized successfully
|
|
- Target interface speed: 4000 kHz (Fixed)
|
|
- Found 1 JTAG device. Core ID: 0x2BA01477 (None)
|
|
- Connected successfully
|
|
- Checking if selected data fits into selected flash sectors.
|
|
- Start of determining flash info (Bank 0 @ 0x10000000)
|
|
- End of determining flash info
|
|
- Flash bank info:
|
|
- 256 * 256 KB @ 0x10000000
|
|
- Start of preparing flash programming
|
|
- End of preparing flash programming
|
|
- Start of determining dirty areas in flash cache
|
|
- End of determining dirty areas
|
|
- CPU speed could not be measured.
|
|
- Start of erasing sectors
|
|
- End of erasing sectors
|
|
- Start of flash programming
|
|
- End of flash programming
|
|
- 0x10140000 - 0x1017FFFF ( 1 Sector, 256 KB)
|
|
- Start of verifying flash
|
|
- End of verifying flash
|
|
- Start of restoring
|
|
- End of restoring
|
|
- ERROR: Programming canceled by user
|
|
J-Flash V7.56d Error: Programming canceled by user
|
|
Disconnecting ...
|
|
- Disconnected
|
|
Close project
|
|
- Project closed
|