/**
 * @file sdrv_codec_tlv320.h
 * @author your name (you@domain.com)
 * @brief
 * @version 0.1
 * @date 2022-08-24
 *
 * @copyright Copyright (c) 2022
 *
 */

#ifndef _SDRV_CODEC_TLV320_H_
#define _SDRV_CODEC_TLV320_H_

#include <sdrv_gpio.h>
#include <sdrv_i2c.h>

#include "sdrv_codec.h"

typedef enum sdrv_codec_tlv320_input {
    SDRV_CODEC_TLV320_INPUT_MIC_IN = 0,
    SDRV_CODEC_TLV320_INPUT_LINE_IN,
} sdrv_codec_tlv320_input_t;

typedef enum sdrv_codec_tlv320_output {
    SDRV_CODEC_TLV320_OUTPUT_PHONE_OUT = 0,
    SDRV_CODEC_TLV320_OUTPUT_LINE_OUT,
} sdrv_codec_tlv320_output_t;

/**
 * @brief codec device specific configuration , it is defined by specific codec
 *
 */
typedef struct sdrv_codec_tlv320_cfg {
    /*!< codec i2c control module. */
    sdrv_i2c_t i2c_ctrl;
    /*!< codec i2c device address. */
    uint16_t slave_addr;
    /*!< codec mclk rate which is defined in clock config. */
    uint32_t clk_rate;
    /*!< codec mclk rate which is defined in clock config. */
    sdrv_codec_tlv320_input_t input_path;
    sdrv_codec_tlv320_output_t output_path;
} sdrv_codec_tlv320_cfg_t;

/**
 * @brief  initializes codec module
 *
 * This fuction is used to initializes codec module.
 *
 * @param [in] codec sdrv codec device
 * @param [in] cfg sdrv codec device  configurations
 * @return sdrv_codec_status_t
 *
 */
sdrv_codec_status_t sdrv_codec_tlv320_init(sdrv_codec_t *codec,
                                           sdrv_codec_cfg_t *cfg);

/**
 * @brief set audio codec module params.
 *
 * This fuction set codec  params
 *
 * @param [in] codec sdrv codec device
 * @param [in] params sdrv codec params
 * @param [in] type  playback  or capture type
 * @ return sdrv_codec_status_t
 *
 *
 */
sdrv_codec_status_t sdrv_codec_tlv320_set_params(sdrv_codec_t *codec,
                                                 sdrv_codec_params_t *params,
                                                 sdrv_codec_stream_type_t type);
/**
 * @brief start or stop audio codec module
 *
 * This fuction is used to start or stop audio codec module
 *
 * @param [in] codec sdrv codec device
 * @param [in] cmd start or stop cmd
 * @param [in] type  playback  or capture type
 * @ return sdrv_codec_status_t
 *
 *
 */
sdrv_codec_status_t sdrv_codec_tlv320_trigger(sdrv_codec_t *codec,
                                              sdrv_codec_trigger_op_t cmd,
                                              sdrv_codec_stream_type_t type);

/**
 * @brief set audio codec volume.
 *
 * @param codec  sdrv codec device
 * @param volume volume value, support 0 ~ 100, 0 is mute, 100 is the maximum
 * volume value.
 *
 * @return sdrv_codec_status_t is success, else configure failed.
 */
sdrv_codec_status_t sdrv_codec_tlv320_set_volume(sdrv_codec_t *codec,
                                                 uint8_t volume,
                                                 sdrv_codec_stream_type_t type);

/**
 * @brief set audio codec mute.
 *
 * @param codec sdrv codec device
 * @param mute true is mute, false is unmute
 * @param type playback  or capture type
 * @return sdrv_codec_status_t
 */
sdrv_codec_status_t sdrv_codec_tlv320_set_mute(sdrv_codec_t *codec, bool mute,
                                               sdrv_codec_stream_type_t type);

#endif //_SDRV_CODEC_TLV320_H_